2-19
High speed damping force adjuster
2
To adjust the damping force, turn the
adjuster in fully and then turn it out.
The fully turned-in position provides
the stiffest damping force and turning
the adjuster out will soften the damp-
ing force. Count the number of turns
from the fully turned-in position. The
high speed damping force is set on 3/
4 turns out at the factory.
Low speed damping force adjuster
3
To adjust the damping force, turn the
adjuster in fully and then turn it out.
The fully turned-in position provides
the stiffest damping force and turning
the adjuster out will soften the damp-
ing force. Count the number of clicks
from the fully turned-in position. The
low speed damping force is set on 8
clicks at the factory.
Turn the adjuster clockwise from the
standard position to stiffen the damp-
ing force. Turn the adjuster counter-
clockwise to soften the damping
force. The damping force should be
adjusted gradually, 1/8 turn at a time,
to fine-tune the suspension.
To Next Page
Loading...
