ENG
7
Operation Manual
MS-2050HT-210
Operation Manual
• Check the correctness of connection polarity and the absence of contact between bared wires
and metal parts of the equipment (see connection diagram in Fig. 6).
Installing and connecting the FM antenna
• Insert the included indoor FM antenna into the FM ANT i jack on the subwoofer rear panel, as
shown in Fig. 6. Install the FM antenna in such a way that reception quality is satisfactory, and then
fix the position of the antenna.
Note. In buildings with weak FM signal use an outdoor FM antenna.
Preparations
HT-210 speaker system can be connected to virtually any audio source: DVD/CD/MP3 player, PC
sound card, etc. (see connection diagram, Fig. 7).
Caution! Before making any connections, make sure the MSS is off and unplugged.
• To connect the HTSS to PC sound cards, МР3/CD players, use the 2RCA to mini-jack signal cab-
les from the package. Connect the RCA jacks and mini-jacks, as shown in Fig. 7.
• To connect the HTSS to CD/DVD/AUX player or TV use the included 2RCA to 2RCA stereo signal
cables (not included) (see Fig. 7).
• To connect the HTSS to TV use the optical cable (included) or coaxial cable (not included) (see
Fig. 7).
Sound card,
CD player,
MP3 player
2RCA to mini-jack
signal cables
Fig. 7. Connection to audio sources
2RCA to mini-jack
signal cables
5.1-channel
sound card
SD/MMC
CARD
USВ
USB/SD-card
connection
SD
USB
To Next Page
Loading...
