SwedeSolutions CFE Plus - User Manual

INSTALLATION MANUAL
HLDF P3 Video
installation
© 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com
Instruction# 1697
Version# 1.06
Part# ntbp
EAN#
Author: KW
INSTALLATION: CFE PLUS P3 VIDEO
WHAT IS THE CFE PLUS
The CFE-Plus (Canbus Function Extender Plus edition) is an add-on CPU (Computer) for your Volvo.
Since it acts as another CPU in your Volvo, the CFE Plus is capable of adding functions. (See the CFE Product
page on our website for details on all possible functions).
The CFE Plus comes as an OBD dongle. (OBD is On Board Diagnostics; a connector available at the door side of
the steering wheel, behind a small hatch).
For Volvo’s of the P3 type ( S60, V60, XC60, V70, XC70, S80 MY 2007 – 2018) and V40/V40 CC a more or less
special extra feature has been made available; controlling the HLDF / ICM / IHU (which is the Volvo’s original
RTI Navigation screen or Internal Head Unit) in such a way that a direct hookup of for example a reversing-
and-or front-camera or external video player/navigation device/mirrorcast/airplay device is possible without
any additional interface!
This manual describes how to connect and control this extra feature and how to connect a device to the HLDF
/ ICM / IHU, it does not describe the actual camera mounting, for that other documents are available.
KNOWLEDGE/TOOLS AND EXTRA’S REQUIRED
To be able to connect any device to the HLDF/ICM/IHU you’ll need at least the following tools and extra’s.
* Fishbone tool * Torx 20 screwdriver * Size 8 and 10 wrench (alternatively : flat bottom pliers)
For P3 2007-2011 (popup screen) : Preferably also Volvo specific tool with part number : 9512943 or an alter-
native tool to remove the cover around the HLDF.
In case you do not have the tool mentioned above (or a similar tool) available, we strongly suggest to ask your
local Volvo dealer for support on removal of the panel around the screen (See installation procedure ‘step 1’) !

Summary

CFE Plus P3 Video Installation Overview

What is the CFE Plus

Explanation of the CFE Plus add-on CPU for Volvo, its function, and OBD connection.

Required Tools and Knowledge

Lists necessary tools, screwdrivers, wrenches, and specific Volvo tools for installation.

Initial Setup and System Operation Check

CFE Plus Firmware Configuration

Guide to enabling HLDF/ICM/IHU display functions via CFE Plus firmware settings.

P3 2007-2011 HLDF Operation Check

Instructions to verify HLDF switching to video source 1 using specific button combinations.

P3;V40 2011-2018 Sensus Operation Check

How to manually switch video sources using the central stack button for Sensus systems.

P3 2007-2011 Installation Procedure

Remove Console Cover Panel

Step-by-step guide to safely remove the decorative cover around the HLDF screen.

Detach HLDF Bracket and Speaker

Instructions for removing screws and disconnecting the bracket holding the HLDF and optional speaker.

Access Panel Removal (DIM;Glove Compartment)

Procedures for removing the Driver Information Module or Glove Compartment for wire routing.

Connect Video Sources to HLDF

Connecting video input to the green (Video 1) and brown (Video 2) ports on the HLDF.

Connect Camera Power Supply

Wiring the 12V+ and GND for the camera harness using quick connectors.

P3;V40 2011-2018 Installation Procedure

Remove Sensus Screen Cover and Connector

Steps to remove the cover and disconnect connectors from the Sensus system.

Remove Sensus Screen Torx Screws

Instructions for removing Torx screws securing the Sensus screen.

Detach Sensus Panel and Connectors

Removing the side panels and disconnecting electrical connectors from the Sensus unit.

Remove Central Console Trim

Procedure for removing the central console for access to wiring.

Remove Cover (Without Sensus Connect)

Specific step to remove the cover for cars without Sensus Connect.

Connect Harness (Without Sensus Connect)

Connecting the provided harness to the BROWN/GREEN connectors for non-Sensus Connect systems.

Remove IHU and Connect Harness (With Sensus Connect)

Removing the IHU and connecting harnesses for Sensus Connect systems.

Route Wiring and Locate Connector

Guiding wires down the right side and locating the necessary connector under the carpet.

Connect Power and Ground

Connecting 12V+ and GND to the camera harness using quick connects.

Remove Center Console Carpet (V40)

Specific step for V40 models to remove carpet from the center console.

Route Camera Cable and Connect (V40)

Routing the camera cable and connecting positive/negative wires.

Wiring Connection Techniques

Utilizing Quick Connect Tools

How to use the supplied quick connect tools for secure wire splicing.

Alternative Wire Splicing Method

Method for connecting wires without soldering or specific connectors using basic tools.

SwedeSolutions CFE Plus Specifications

General

Brand	SwedeSolutions
Model	CFE Plus
Category	Automobile Electronics
Language	English