100
FITTED EQUIPEMNT
9.13 Care of laminate tops, tables,
furniture and doors
DO NOT use abrasives, chemically treated cloths
or aggressive detergents as these may cause
damage.
DO NOT place hot objects on laminated surfaces
i.e. tops, tables. Any temperatures 70°C and over
will cause permanent damage.
Clean worktop surfaces, furniture and door
fascias with a soft, slightly damp cloth, dry off
with a soft cloth.
9.14 Furniture doors
During normal travelling, vehicle vibration and
flexing may cause some of the furniture doors to
become out of alignment. For your convenience
many hinges are adjustable.
9.15 Table storage
Tables should be stored away in their dedicated
storage locations when travelling (inside
wardrobes or on the bulkhead in front of the
rear beds). Ensure they are securely clipped into
place whilst in transit.
To avoid damage, care must be taken when
removing tables from their stored positions.
9.16 Shower
When using the shower, always ensure that the
shower door is fully closed thus avoiding water
spray on unprotected areas.
• Orbit shower heads are provided with a button
at the side of the head to allow users to control
the flow of water.Care should be taken as
water may become hot temporarily when
switched on until it mixes and regulates.
• Small children should be supervised at all
times when using the shower.
• We recommend unfastening the shower head
before travelling and storing safely to prevent
it becoming detached whilst travelling.
9.17 Colour reference
The colour code for touch ups or resprays for all
Fiat cab components Lanzarote Grey 385. Some
dealer special cabs may have their own colour
specified from the Fiat standard range. For Fiat
cabs other than specified above contact your
dealer to obtain a colour match.
Please be aware that colours can fade over
time, and therefore, if the vehicle is more than a
few years old, it is suggested a colour match be
obtained.
9.18 Sliding Door Flyscreen
Operation
The sliding door flyscreen runs on tracks
mounted to the floor and the Control panel and
moves from left to right. It is tensioned with
cords that are fixed at floor level near to the
passenger seat.
When the vehicle sliding door is open pull the
blind from the central part of the vertical handle
avoiding twisting to close the blind.
Ensure flynet is open before closing the vehicle
sliding door.
Care
Clean only with a damp sponge ensuring dirt
build that would affect the running tracks is
removed. Use only clean water with mild suds
or a vacuum cleaner. In order to avoid material
fatigue, do not leave the flyscreen closed for a
long period. Take care with high winds when the
flynet is closed.
To Next Page
Loading...
