93
FITTED EQUIPEMNT
2. Switch the cooktop on as shown (fig.b)
Depending on the model, the burners are
ignited differently:
- Manual ignition: (fig.b)
- Piezo ignition: (fig.b)
- Electrical ignition:(fig.b)
Switching off
• Switch the cooktop off as shown (fig.c).
Replacing the gas container
WARNING: Explosion hazard
• Only replace the gas container in places with
good ventilation.
• Ensure that there is no source of ignition
nearby.
• Only change the gas container when the
device is not in use and the gas supply to the
device is switched off.
1. Switch the device off by turning the knob to
the zero setting.
2. Close the valve on the gas container.
3. Replace the gas cylinder according to
the instructions from the gas fitting
manufacturer.
Cleaning and maintenance
CAUTION: Burn hazard
Leave the device to cool down properly before
cleaning, checking or maintaining the device.
Cleaning the device
1. Remove the pan support (fig.c).
2. Clean the device with a soft, damp cloth
(fig.c)
Find additional care instructions for stainless
steel and glass surfaces online on
https://documents.dometic.com/
Annual safety check
The assembly and installation of the gas
connection must be performed by a qualified
person who has demonstrated skill and
knowledge related to the construction,
installation and operation of gas appliances and
has received safety training to identify and avoid
the hazards involved.
• For safety reasons, have the device checked
by a qualified person every year for proper
function. Any defects must be repaired.
Replacing the nozzles
The assembly and installation of the gas
connection must be performed by a qualified
person who has demonstrated skill and
knowledge related to the construction,
installation and operation of gas appliances and
has received safety training to identify and avoid
the hazards involved.
• Let a qualified person replace the nozzles as
shown (fig.e - fig.f)).
To Next Page
Loading...
