95
FITTED EQUIPEMNT
Care instructions: Clean the blind only with a
damp sponge. Clean on a regular basis to avoid
dirt particle build up as this can damage the
blind material. Use only water or with mild suds
or a vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
To adjust the tension of the Horrex blind:
Trim panels or window surround will need to be
removed before the blind can be re-tensioned.
In each corner piece there is an cord tensioner
(see photo). By unscrewing the hexagon screw,
the cord can move through the cord tensioner.
When you pull the cord, the tension will get
higher, when you let it move back the tension
will get less.
Roof lights
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when driving.
Roof lights provide essential fixed levels of
ventilation.
Mini Heki Rooflight
To open depress button and push bar upwards.
The rooflight has two open ventilation positions
and a fully open position.
The blind and flynet operate independently of
each other and are engaged by connecting to
each other and sliding.
Heki care instructions: Clean the blind only with
a damp sponge. Clean on a regular basis to avoid
dust/ dirt particle build up as this can damage
the blind material. Use only water or with mild
suds or a vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Midi Heki Rooflight
With operating bar: To open, depress button
and push bar to required position. The rooflight
has two open ventilation positions and a fully
open position.
To close, reverse the operation and then check if
locked into position.
To Next Page
Loading...
