Fitted Equipment
123
6. Secure by tightening the Mast Locking
Collar and Wall Bracket
REMOVING THE ANTENNA
A permanently fitted Status can be easily
removed leaving only the Mounting Foot and
rubber gaiter.
1. Unplug the antenna from the Power Pack.
2. Loosen the Mast Locking Collar and Wall
Bracket and lift off whilst feeding out the
cable.
3. Push the Blanking Cap supplied into
place.
IMPORTANT – The Blanking Cap is a
temporary seal and is not for long term use.
WING OMNI-DIRECTIONAL
TV ANTENNA (model dependant )
This is a plug and play antenna, only suitable
for use with televisions. The pinnacle on the
roof cannot be removed.
To Next Page
Loading...
Need help?
General
