Fitted Equipment
129
3. Press button (3 A) for unlocking motor
gear: Keep button pressed and turn the
crank handle (3 B) for moving
closing/opening the rooftop
Attention:
The roof light might close abruptly-
Therefore always hold the crank handle
securely as long as the gear is unlocked.
For relocking the motor gear, pull the button
(A) down and move the crank handle until
gear is locked to the motor gain.
Lighting
Press the balance switch
Fly net functions
Push crossbar of fly net against crossbar of
pleated material until it locks. To release
blind, push both crossbars against each
other and press gently. Guide the fly screen
back to the open position.
Sun protection
Push crossbar of pleated material until
requested position is reached
Attention: DO NOT allow the blind to spring
back as this will cause damage.
MAINTENANCE
Care
Never use aggressive or corrosive
cleaners
The acrylic cover and the frame is to be
cleaned only with damp cloth and with mild
cleaner that does not contain solvents or
abrasives.
Take care that water does not get into the
motor and into its electrical wiring. The
ventilation grids of the inner frame can be
removed for cleaning purposes.
All rubber seals should be dusted with
talcum powder at least once per year.
The fly net and pleated sunscreen may be
cleaned by using a soft brush or a damp
cloth.
Retensioning
After demounting the inner frame, the spring
of the fly net of blind system can be
retensioned (put screwdriver into spring
tension clip and turn clockwise -2 times)
The cords of the sun screen system can be
retightened by unscrewing the clamps with
an hexagon spanner. Retighten the cords by
3-5mm if necessary. You should do this on
both cords equally in order to keep the
crossbar parallel to the pleated material.
Documents
User Guide and crank should be stored
within thevehicle.
Spares
Spare parts can be bought from your dealer.
To Next Page
Loading...
