12. Applicator probe (iMRS complete, iMRS professional)
The applicator probe, made of anodized metal, is only
included in delivery of the iMRS complete and the
iMRS professional. It is used for the localized applica-
on of individual areas or lile spots on the body. The
magnec eld vibraon from the probe has a maxi-
mum peak average strength of approximately 300 µT
and has dissipated at a distance of 5/1.5m in the
direcon of the probe, it has dissipated virtually com-
pletely 3.2/1m from the probe at right angles to the probe.
If the applicator probe is used, the iMRS automacally selects a xed specied program for local
applicaon.
This applicaon can only be used with the original applicator probe. If no applicator has been
connected or an applicator is defecve, the display of the iMRS singalizes a failure (Applicator
not plugged, Applicator broken). In both cases, you are unable to start the applicaon.
To Next Page
Loading...