Sylvania SRDD495 - Auto Repeat; Recording; Recording & OTR (One Touch Recording); Timer Recording

–
12
–
EN
VCR Functions
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record tab.
To record on it later, cover the hole with
adhesive tape.
Record tab
• Select the chan-
nel to record.
1
1
2
2
with tab
SP
• Select the desired
tape speed.
3
3
REC
4
4
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour
Recording/Playback TimeTape Speed
123
456
789
0
SPEED
REC/OTR
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR
(
8:00
)
OTR
(
7:30
)
5
5
6
6
STOP
OPEN/CLOSE
/EJECT
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for
broadcasting, see “RF Output Channel” section.
POWER
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
REC/OTR
MENU
SETUP TOP MENU
MODE ZOOM
SUBTITLE
ENTER
RETURN
SEARCH
MODE
OPEN/CLOSE
/EJECT
SPEED AUDIO
CLEAR/
C. RESET
123
456
789
0
+1 0
6
6
5
5
2
2
3
3
4
4
Press [REC/OTR] repeatedly to select the
desired recording length.
SKIP/CH.
VCR
VCR
You CAN NOT copy a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press [PAUSE
kk
].
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark
represents one minute.
• Press it again to resume recording.
• Pause mode will be automatically cancelled after 5 minutes to prevent damage to
the tape and the video head.
VCR
CHANNEL
OPE
N
STOP/EJECT PLAY REC/OTR
POWER
F.FWDREW
VIDEO
AUDIO
1
1
6
6
2
2
4
4
Recording & OTR (One Touch Recording)
1
1
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
This function will playback a tape
repeatedly from the beginning
when the tape reaches to the end.
VCR
VCR
VCR
Auto Repeat
or
MENU
2
2
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
Hint
Hint
• To cancel Auto Repeat, follow steps 1)-2) above. Then, press [ B ], so that [OFF] appears beside AUTO REPEAT. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen at step 3), press [CLEAR/C.RESET] to exit.
or
•Insert a tape with its record tab
into the unit.
2
2
PROGRAM NUMBER 4
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
1
1
Select an empty program number.
Timer Recording
VCR
VCR
VCR
or
MENU
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
Available program num-
ber flashes.
3
3
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”.
or
4
4 Select the desired month
Select the desired day.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
• You can program one
year in advance.
or
or
Hint
Hint
• If you want to watch one channel while recording another...
1) Press [VCR/TV] to put the unit in TV position.
2) Select a channel you want to watch with the cable box or the satellite box.
5
5
H9805UD_EN/SP.qx3 2005.06.10 15:17 Page 12