7
2).Voltage display: It shows that the current average voltage value for the battery
3).CLOCK SET:
3-1).Entrance mode: press “M” button for 2±0.5 seconds at the “clock” mode. Then enter into time
setting mode status, it can adjust “hour”.
3-2).Quit mode：In setting mode, keep no any touch button for 30±1 seconds, or press “M” button in
single digits of setting minute.
3-3).Setting mode: short press “M” button for 0.5±0.25 second. “hour” —> tens digit of “minute” —>
single digits of “minute”—> quit.
3-3-1).In setting “hour” mode, short press “S” button for 0.5±0.25 second then figure add one. For
example:
1——>2——>…——>11——>12——>1
3-3-2).In setting “minute” mode, short press “S” button for 0.5±0.25 second then figure add one. For
example: 1——>2——>…——>11——>12——>1
3-3-3).In setting single digit of “minute” mode, short press “S” button for 0.5±0.25 second then figure add
one. For example: 0——>1——>2…——>8——>9——>0
The oil indicator:
The engine oil indicator lamp always keeps on every cumulative 1000 km.
When the engine oil indicator lamp always being on, press "SET" button more than 2±0.25 seconds in
the "ODO" mode, then the engine oil indicator lamp will go out.
To Next Page
Loading...
Need help?
General
