Speedometer:
Indicates driving speed.
Tachometer:
Indicates engine rpm.
Odometer：
Indicates total accumulated distance traveled.
High Beam Indicator:
This indicator comes on with high beam
headlight is turned on.
Turn (left/right) Signal Indicator:
The left or right Indicator will be flashing
according to the operated directions of turn
signal light switch when it is turned on.
Fuel Meter:
The fuel meter shows how much fuel remains
in the tank.
Engine Oil replacement Indicator Light:
When this indicator light flashes display, alert
users to change the engine oil.
Fault indicator light：
If there is something wrong with the ECS, the
warning light will light all the time.
Speedometer setting:
1-1).Short mileage display (TRIP)
Cleaning mode: Pressing “S” button for 2±0.5
seconds at the TRIP display status, trip meter
may reset to zero (0.0) and re-calculation.
Switching mode: Press “M” button for 0.5±0.25
seconds at the TRIP display status, switch to
ODO display.
1-2).Long mileage display (ODO: odometer)
Switching mode: Press “M” button for 0.5±0.25
seconds at the TOTAL display status, switch to
TRIP display.
*Ignition off then starting engine and keeping
the TRIP display status. After switch off then
starting it will return to ODO display.
To Next Page
Loading...
Need help?
General
