Sym GTS 250 - Engine Removal

5. Removal & Installation of Engine
5-2
Engine Removal
Open inner box cover.
Remove battery cover (1 screw).
Remove the battery negative (-) cable.
Remove the battery positive (+) cable.
Open the seat.
Remove the luggage box (6 bolts, 2 screws).
(Refer to chapter 13)
Remove right and left side covers (4 screws on
each side.).
Remove rear carrier (4 bolts).
Remove body cover (4 screws & 1 coupler).
(Refer to chapter 13)
Remove the power coupler of auto by-starter.
Remove the spark plug cap.
Positive
To this chapter contents
Spark plug cap
Auto by-starter coupler
Negative