Sym Joyride200 - Steering Handlebar

15. STEERING/FRONT WHEEL/FRONT BRAKE/FRONT CUSHION
15-5
Loosen nuts and locating sleeve from the
handlebar.
Remove the handlebar.
Installation
In reverse order of the disassembly.
Caution
Carry out the following inspection and
adjustment:
-
Operation of the throttle.
-
Brake level free travel.
-
Operation of all meters.
Bolt
×
××
×1
11
1
Apply grease to the throttle cable end and
connect it to the throttle holder.
After the steering handlebar is installed,
check the throttle cable for free movement.
To this chapter contents