5. ENGINE REMOVAL
5-6
Check if engine mounting bracket bushing and
cushion rubber for damage.
Engine Mounting Bracket Installation
Install engine onto engine mounting bracket.
Install engine mounting bracket bolts & nuts and
then tighten the nuts.
Engine Installation
Check if the bushings of engine suspension parts
and shock absorber for damage.
Install engine in the reverse procedures of
removal.
Caution
˙
Pay attention of foot & hand safety as engine
installation to avoid hurting.
˙
Do not bend or twist wires.
˙
Cables wires have to be routed in
accordance with normal layout.
˙
Small-end bearing ring has to forward to
inside (bearing) as assembling the swing
arm.
Engine Mounting Bolt:
Torque value: 4.0~5.0 kgf-m
Rear shock absorber bolt:
Torque value: UPPER: 3.5~4.5 kgf-m
LOWER: 2.4~3.0 kgf-m
Rear wheel shaft bolt:
Torque value: 11.0~13.0 kgf-m
Bush
Bolt
×
××
×1
11
1
Bearin
To Next Page
Loading...
