To Next Page

To Previous Page

○F Seat Open Button

This seat open button is designed to open the seat.

 Turn the ignition switch knob to “On” position.

 Push this button to open the seat.

○G Ignition Switch Ring

The ignition switch ring only goes on in the below conditions when a verified smart key is in operating

range.

 The ignition switch knob is pushed in “Off” position.

 The ignition switch is in “On” position.

 The ignition switch ring slowly flashes when you are using the answer back function.

 When the ignition switch is in “On” position, the ignition switch ring slowly flashes when the smart key is

out of the operating range.

NOTE :

 The seat open button can only be operated in “On” position.

CAUTION:

 Never operate the ignition switch key when the scooter is running. Turning the ignition switch to “Off ”

position will shut off the electrical system and that may result in a dangerous accident. The ignition

switch can only be turned off after the scooter is completely stopped.

 If the ignition switch remains in the “On” position for a prolonged period after the engine is stopped,

the battery voltage will be reduced and this may affect engine’s start capability.

 Lock the handlebar before leaving the scooter.

Questions and Answers:

Need help?

Do you have a question about the Sym MAXSYM 400 and is the answer not in the manual?

Sym MAXSYM 400 Specifications

General