Sym MAXSYM 400 User Manual

52
Exterior Lighting Burned-out
This scooter is equipped with LED exterior lighting except the license plate light. If any LED exterior lighting
fails, have your scooter checked by an authorized SYM dealer.
To replace the license plate light, follow the below instructions.
 Turn the ignition switch off and set the scooter upright with the main stand, and cool down the license
plate light.
 Remove the screw ○A to remove the license plate light cover ○B .
 Carefully pull out the burned-out bulb ○A without turning and replace it with a new one.
License plate light type
T10, W5W, 12V 5W
 Reverse the above steps to restore.
○A
○B
○A

Sym MAXSYM 400 Specifications

General

Displacement	399 cc
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Transmission	CVT
Front Suspension	Telescopic fork
Front Tire	120/70-15
Rear Tire	160/60-14
Seat Height	800 mm
Dry Weight	215 kg
Engine Type	4-stroke, single cylinder
Rear Brake	Disc, ABS
Fuel Capacity	13 liters
Wheelbase	1555 mm
Front Brake	Disc, ABS