To Next Page

To Previous Page

 If the air cleaner element is damaged or too dirty, have it changed by an authorized SYM dealer.

 To install the element, do in the reverse order of the above instructions.

This scooter is equipped with a V-belt case air cleaner element. Inspect the V-belt case air cleaner by

following the below instructions:

 Turn ignition switch off and set the scooter upright.

 Remove the 4 bolts ○A and remove the left crankcase outer cover ○B .

 If the V-belt case air cleaner element ○A is damaged or too dirty, have it changed by an authorized

SYM dealer.

 To install the element, do in the reverse order of the above instructions.

Tightening torque

Left crankcase outer cover bolt: 1.0 kgf-m

Headlight Adjustment

The headlight aim can be adjusted for proper alignment. Use a Phillips screwdriver to adjust the low and

high beam vertical adjuster ○A . Headlight aiming should be performed by an authorized SYM dealer.

NOTE :

 Make sure to keep dust or foreign objects from entering the air cleaner during inspection.

 Use SYM genuine air cleaner element to ensure the engine performance.

○A

○B

○A

Questions and Answers:

Need help?

Do you have a question about the Sym MAXSYM 400 and is the answer not in the manual?

Sym MAXSYM 400 Specifications

General