EasyManuals Logo

Sym MAXSYM 400 User Manual

Sym MAXSYM 400
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
Front / Rear Brake Pad Inspection:
If you feel something is wrong when applying the brakes, have your scooter checked by an authorized SYM
dealer.
Inspect the front brake pads A and the rear brake pads B wear of both disk brake calipers.
If any groove indicator a is nearly worn out, have the brake pads replaced by an authorized SYM
dealer.
NOTE :
Brake fluid may harm painted surfaces and plastic parts. Spilled fluid must be cleaned up immediately.
Refill with the same type of brake fluid.
WARNING:
Use only DOT 4 brake fluid.
Brake fluid is easy to absorb moisture from the air; any absorbed moisture will reduce the braking
efficiency greatly.
Never let water or dirt enter the reservoirs when refilling.
Contact an authorized SYM dealer immediately if any brake fluid leakage is found.
a
A
A
a
a
B

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sym MAXSYM 400 and is the answer not in the manual?

Sym MAXSYM 400 Specifications

General IconGeneral
Displacement399 cc
Fuel SystemElectronic Fuel Injection
Cooling SystemLiquid cooled
TransmissionCVT
Front SuspensionTelescopic fork
Front Tire120/70-15
Rear Tire160/60-14
Seat Height800 mm
Dry Weight215 kg
Engine Type4-stroke, single cylinder
Rear BrakeDisc, ABS
Fuel Capacity13 liters
Wheelbase1555 mm
Front BrakeDisc, ABS

Related product manuals