1. General Information
1-16
E. CLUTCH AND DRIVING PULLEY
1. Broken clutch spring
2. Clutch outer stuck with clutch weights
3. Connection parts between clutch and shaft worn
out or burned
Engine can be started but the
vehicle cannot run
1. Worn out or damaged drive belt
2. Damaged movable drive face
3. Damaged driven face spring
4. Broken clutch weight
5. Broken drive shaft groove
6. Worn out or damaged transmission
gear
Engine shuts down or trembles
when the vehicle is running
(rear wheel rotates during
engine idling).
Poor initial driving (poor
climbing performance)
1. Worn or deformed drive belt
2. Worn weight roller
3. Worn driven face
4. Deformed driven face spring
5. Grease on drive belt or drive / driven
face
To Next Page
Loading...
