Sym Maxsym TL TL 500 - Combination Instrument

9
Combination Instrument
This instrument is integrated with a brightness sensor; the sensor controls the brightness of the TFT
display and the multi-function meter. The combination instrument is activated when the ignition switch is
turned on. Most indicators are lit up shortly and the welcome animation appears on the TFT display, and
the text and digits in the multi-function meter is lit up as marquee for function test, then the whole
combination instrument turns to operational mode.
NOTE :
 Do not wipe plastic components, such as the instrument panel, the headlight, body covers, etc. with
solvents, such as gasoline. Wiping plastic components with solvents can damage these components.
WARNING:
 Never operate the instrument buttons while riding the scooter.
MAXSYM TL (TL47W1-EU)
TL 500 (TL47W1-EU)
2
4
5
1. Brightness sensor
2. Indicators
3
2
2
3. Setting buttons
4. TFT display
1
5. Multi-function meter