Sym Maxsym TL TL 500 - Tire; Tire Pressure Inspection

39
Tire / Tire Pressure Inspection
 Remove the air valve cap.
 Measure the tire pressure with a tire pressure gauge ○A often and inflect the tires to the recommended tire
pressure.
Recommended air pressure for standard tire MAXXIS SUPERMAXX S3
Front: 2.3 kgf/cm
2
, 32 psi (120/70-R15 56H)
Rear: 2.8 kgf/cm
2
, 39 psi (160/60-R15 67H)
 Visually inspect the tire for cracks and cuts ○A before riding, replace the tires when necessary.
 Measure the depth of the tread with a depth gauge ○A , replace the tire that has worn down to the minimum
allowable tread depth.
WARNING:
 Insufficient tire tread depth can make the scooter difficult to control.
 Please refer to the local regulations about tire tread depth.
 New tires are slippery and may cause loss of control. Smoothly operate the scooter during break-in
period for the new tires.
 Mixing different brands or types of tires can adversely affect handling and may cause fatal injuries.
○A
○A
○A