Sym Maxsym TL TL 500 - Ignition Switch

20
Ignition Switch
IGNITION SWITCH IGNITION KEY
○A Ignition Key Slot
Insert the ignition key into the ignition key hole to operate the ignition switch.
○B “On” Position
Engine can be started in this position. Ignition key cannot be removed. Electrical equipment can be used.
Headlight comes on in this position. The USB power outlet can be used in this position.
○C “Off” Position
Engine can be turned off in this position. Electrical circuits will be turned off.
○D “Fuel Lid” Position
The fuel lid can be opened in this position.
 Turn the ignition key to “Off ” position.
 Turn the ignition key anti-clockwise to open the fuel lid.
 The ignition key will return to “Off ” position automatically.
○E “Lock” Position
The handlebar can be locked in this position.
 Turn the ignition key to ”Off ” position to stop the engine.
 Turn the handlebar fully to the left.
 Push the ignition key anti-clockwise to lock the handlebar.
 The ignition key can be removed in this position.
 To unlock the handlebar, turn the ignition key clockwise to “Off ” position.
○F Shutter Opener
This shutter opener is designed to open the magnetic shutter.
Align the projection ○b of the shutter key with the shutter slot ○a , and turn the shutter key clockwise to
open.
○G Magnetic Shutter
This magnetic shutter button is designed to close the ignition key slot.
 In “Off ” position, remove the ignition key and push this button to close the slot.
 In “Lock” position, remove the ignition key and push this button to close the slot.
○a
○b
○A
○B
○C
○D
○E
○F
○G
○H