EasyManua.ls Logo

Sym Maxsym TL TL 500 - Brake System Checks and Fluid

Sym Maxsym TL TL 500
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Coolant Change
Contact an authorized SYM dealer to have the coolant changed.
It is highly recommended to use SYM Long Life Coolant or equivalent products when filling or changing
coolant. SYM Long Life Coolant is premixed and contains a 50% solution of ethylene glycol based
antifreeze, and does not need to be diluted before topping up or changing. SYM Long Life Coolant is also
contains corrosion inhibitor to protect the cooling system.
Coolant capacity: 1.3 liters.
Please refer to the below list of antifreeze concentration.
Antifreeze concentration
Temperature
Remark
20%
-8
To ensure antifreeze
performance, the original
equipped coolant has 50%
of antifreeze.
30%
-15
40%
-24
50%
-36
Brake System Inspection
This scooter is equipped with a disk brake system on the front wheel and the rear wheel. If there is something
wrong when applying the brakes, have the brake system checked by an authorized SYM dealer.
Front / Rear Brake Fluid Level Inspection:
Set the scooter upright.
To inspect the right brake fluid reservoir, turn the handlebar to the left. To inspect the left brake reservoir,
turn the handlebar to the right.
Check the brake fluid level in the front / rear brake fluid reservoir A .
With the front brake reservoirs held horizontal, the brake fluid level in the inspection window must be
above the L line a .
If the brake fluid level is below the lower level, contact your SYM authorized dealer to adjust the fluid
level.
Recommended brake fluid
DOT 4.
NOTE :
Brake fluid may harm painted surfaces and plastic parts. Spilled fluid must be cleaned up immediately.
Refill with the same type of brake fluid.
a
A

Related product manuals