4. ENGINE REMOVAL
4-1
Maintenance Information················· 4-1
Engine removal ································ 4-2
Engine installation ··························· 4-4
Maintenance Information
There are parts that require removal of engine for maintenance.
z Crankcase
z Crankshaft
Related bolts tightening torque for removal of engine:
Bolt for engine hanger (frame side) 4.5~5.5kgf-m
Bolt for engine hanger (engine side) 5.0~7.0kgf-m
Rear cushion upper mounting bolt 3.5~4.5kgf-m
Rear cushion under mounting bolt 2.4~3.0kgf-m
Exhaust pipe connection nuts 1.0~1.4kgf-m
Muffle mounting bolts 3.0~3.6kgf-m
4
Home page
Contents
To Next Page
Loading...
