DOC 6511_Release K
ATS-6511A/B/C Users Guide
104
The variables are organized into a hierarchy that groups related variables together. This
enables displaying only the subset of variables that a user may be interested in by
specifying the desired node within the hierarchy. For instance, status_port status:gps will
display only the GPS status variables instead of all the variable.
Syntax: status_port [NODE]
NODE node to display
Command Example:
ATS-6511>status_port
NOTE: Hit <return> to switch back to command port.
See also: diag_port, ptdraw_port, ptdavg_port, show
Syslog:
Description: Dump system log. System information pertaining to the underlying
operation of the system and operating system is logged to aid in troubleshooting efforts.
These logs can be retrieved via the status port using the syslog command. When a log
becomes too large it is archived and a new log is started. The syslog command retrieves the
current log but archived logs can be retrieved by specifying the desired log number. A
maximum of 5 archived logs are stored with 0 being the most recent and 4 being the oldest.
Syntax: syslog <GEN>
GEN archived log generation number (0-4)
Command Example:
ATS-6511>syslog
To Next Page
Loading...
Need help?
General
