DOC 6511_Release K
ATS-6511A/B/C Users Guide
41
N. The last set of data [unit] will display the system network information, serial number, the
system startup time, the uptime since the last power cycle, the software version running
on the system, and the time the status command was executed.
[unit]
[network]
[MAC] 00:A0:69:02:00:AD
[broadcast] 192.168.150.255
[default_gateway]
[ip] 192.168.150.85
[netmask] 255.255.255.0
[serial_number] P44308
[start] 2013-08-05-14:23
[uptime] 8 days, 4 hours, 20 minutes
[ver] tflex-5-1-0
O. Send the settings command and verify the user defined set up parameters are correct.
ATS-6511A>settings
[command_port]
[prompt]
[enable] true
[text] 6511C_1>
[diaglog]
[cpld4370] info
[fiber] info
[kas2] info
[lnsrawstate] info
[software] info
[switching] info
[timecode] info
[tsc4370] info
[tsgather] info
[warmstart] info
[fiber]
[delay]
[channelA] 0.000000000000000e+00
[channelB] 0.000000000000000e+00
[delay_diff]
[channelA] 0.000000000000000e+00
[channelB] 0.000000000000000e+00
[mode] two_way
[pll]
[proportional_gain] 1.000000000000000e-02
[switching]
[auto_rearm] true
[master] A
[min_valid_time] 30
[mode] auto
[hardware]
[enable_fp_button] true
[slots]
[1]
[tsc4373]
[ports]
[1]
[pps_period] 1.000000000000000e+00
To Next Page
Loading...
Need help?
General
