DOC 6511_Release K
ATS-6511A/B/C Users Guide
67
[status] good
[power] enabled
[type] 4394A
[2-4] Same as slot 1 for the card installed
[5]
[type] empty Indicates a card is not installed.
[6]
[type] empty
[warmstartable] true Unit has enough data to warmstart
[power] Power Supply Information
[numsupplies] 2 # of Supplies Operating
[supplies]
[1] Left Power Supply
[status] good Current Status
[type] 4385A Model #
[2] Right Power Supply
[status] good Same as Supply #1
[type] 4385A
[temperature] 30 Internal Temperature ºC
[health] Operating Status Information
[clock_wander] Clock Issues.
[active] false Active = True for current alarm
[cleared] When the alarm condition cleared
[what] Clock wander is less than 100.000000ns What cleared
[when] 1998-01-01-00:06:49.651 When it cleared
[occurrences] 1 # of times the alarm has occurred
[set] When the alarm happened
[what] Clock wander exceeded 100.000000ns What happened
[when] 1998-01-01-00:06:47.534 When it occurred
[fan] Fan Issues
[1]
[active] false
[occurrences] 0
[2]
[active] false
[occurrences] 0
[fiber_signal_present] Fiber Issues
[active] false
[cleared]
[what] Fiber signal is present
[when] 2011-06-09-21:26:38.331
[occurrences] 1
[set]
[what] Fiber signal is missing Note: This is the date when the unit is first
[when] 1998-01-01-00:02:31.457 powered up - the date/time has not been set.
[firmware_version_mismatch]
[active] false
[occurrences] 0
[hardware_internal] Internal Clock Issues
[active] false
[occurrences] 0
[holdover_ref_comm_error]
[active] false
[occurrences] 0
[holdover_ref_missing]
[active] false
[occurrences] 0
[holdover_ref_unlocked]
[active] false
To Next Page
Loading...
Need help?
General
