DOC 6511_Release K
ATS-6511A/B/C Users Guide
2
Output Cards: The ATS-6511 has ten output cards available:
1. 4395A-10 Four 10Mhz Outputs
2. 4395B-10 Four 10Mhz Outputs (Lower Noise)
3. 4395A-5 Four 5Mhz Outputs
4. 4395B-5 Four 5Mhz Outputs (Lower Noise)
5. 4395A-1 Four 1Mhz Outputs
6. 4395B-1 Four 1Mhz Outputs (Lower Noise)
7. 4394A Programmable PPS and DC IRIG Module. Users can define the
signal types and operating parameters. Default set up is two 1PPS Outputs
and two DC IRIG Outputs(Default = B000)
8. 4387A Four Modulated IRIG Outputs (Default = B120) or NASA36
9. 4387A-6V Four Modulated IRIG Outputs (Default = B120) or NASA36,
6 Vpp outputs.
10. 4399A L-Band card with one 1 PPS output and four RF outputs.*
*Note: This card takes up two of the six card slots available in the rear of the unit and can only be used in the
ATS-6511. This card will not operate in the ATS-6501.
ATS 94000-115200 (formerly ATS 6501 OP001) USB Console Cable:: Allows users to
connect to the system Command Port via a serial cable. This kit includes the programmed
USB/Serial cable and Null Modem cable to connect the USB/Serial cable to a PC.
ATS 94001-5071A (formerly ATS 6501 OP002) USB External Reference Communication
Cable: Provides a serial communications port to an external 5071A frequency reference.
(ATS-6511B and ATS-6511C ONLY)
Notes:
1. The correct Symmetricom part number is constructed by appending the desired options to the base
model in alphabetical order. None of the options are mutually exclusive so users can select as many options
as desired.
Example Part Number: ATS-6511A-DF
Description: Standard Dual Fiber Input with 1 AC power supply, 1 DC power supply, and the front panel
flash option.
2. Fiber cables sold separately.
3. All units include Ethernet and fiber control.
4. Contact Symmetricom (www.symmetricom.com) for current pricing and availability.