SYN-INT-E012
1. Description
The SE72 electronic thermostat can be used to control heat-
ing oors with electrical current − with a resistive load − rang-
ing from 0 A to 16 A at 120/208/240 VAC. It has an easy user
interface and can manage up to four programming periods a
day. It keeps the temperature of a room (Ambient mode) and a
oor (Floor mode) at a requested set point with a high degree
of accuracy.
Floor Mode
(factory setting): this control method is ideal in ar-
eas where you want a hot oor at any time and when the tem-
perature of the ambient air can be high without causing discom-
fort. For example, in a bathroom.
Before installing and operating this product, the
owner and/or installer must read, understand and
follow these instructions and keep them handy for
future reference. If these instructions are not fol-
lowed, the warranty will be considered null and void
and the manufacturer deems no further responsi-
bility for this product. Moreover, the following in-
structions must be adhered to in order to avoid
personal injuries or property damages, serious
injuries and potentially fatal electric shocks. All
electric connections must be made by a qualied
electrician, according to the electrical and building
codes effective in your region. Do NOT connect this
product to a supply source other than 120 VAC, 208
VAC or 240 VAC, and do not exceed the specied load
limits. Protect the heating system with the appropri-
ate circuit breaker or fuse. You must regularly clean
dirt accumulations on or in the thermostat. Do NOT
use uid to clean thermostat air vents. Do NOT use
where exposed to water. Suitable for insulated walls.
WARNING WARNING
To Next Page
Loading...