Synesso S Series User Manual

20
PROGRAMMING
If the machine has been set to universal program mode, you will be able to change the “Le” and “Right”
program, seng the preinfusion me and water count for each. Each brew group will use these programs.
This is the default mode.
If the machine has been set to individual program mode, there will be a separate page for the le and right
programs on each brew group. This allows the groups to use dierent programs. This mode can be selected
in the 2nd level menu. (See page 23)
Line 2 indicates program 1, acvated by a le shi of the group top handle and program 2, acvated by a
right shi of the group top handle.
Line 3 indicates the adjustable preinfusion values in seconds for the le and right programs. If the value is
adjusted to 0 seconds, the preinfusion stage will be skipped.
Line 4 indicates the adjustable ow count values. There are about 4.5 counts per milliliter of water dispensed.
Some of this dispensed water is absorbed and retained by the coee puck, but generally, if you add 9 counts,
you should receive 2 addional mL of water.
To cycle to the next display screen, press the down buon.
Menu Level 1: Programs
Menu: Steam Tank and Hot Water Tap
Please see next page for details.

Synesso S Series Specifications

General

Brand	Synesso
Model	S Series
Category	Coffee Maker
Language	English