Synesso S Series User Manual

5
BREW & STEAM TANK SAFETY
Espresso machines have numerous potenal hazards, and it is of paramount importance to Synesso that
people servicing our machines take all necessary precauons to ensure their personal safety. When working
on the machine’s boilers (unless otherwise instructed in the direcons):
• Turn the machine o and shut o the incoming water supply.
• Depressurize the boilers as shown below.
When working on any electrical wiring (unless checking voltage or amperage readings or otherwise instruct-
ed in the direcons) ensure that the machine is switched o at the red on/o switch on the front panel and
the machine is unplugged.
Depressurizing the Steam Tank:
Depressurizing the Brew Tanks:
1. Turn o the element circuit
breaker located under the machine.
2. Also turn o the water supply to
the machine.
4. The brew tanks are depressur-
ized once the pressure gauge
reads zero. Note – the brew
gauges are rated at 0-300 psi
3. In the second level menu,
change the brew valves from
“Normal” to “ON” this will
bleed the pressure.
“NORMAL” to “ON”
1. Turn o the element circuit
breaker located under the machine
2. Open the steam valve by moving
the steam actuator lever forward
3. The steam tank is depres-
surized when the steam gauge
reads zero. Note: the steam
gauge is rated @ 0-60 psi

Synesso S Series Specifications

General

Brand	Synesso
Model	S Series
Category	Coffee Maker
Language	English