Synology DiskStation DS1522+ - Start up Your Synology NAS

13
Chapter 2: Hardware Setup
Start up Your Synology NAS
To start up your DS1522+:
1
Use the LAN cable to connect the Synology NAS to your switch, router, or hub.
2
Connect one end of the AC power adapter to the power port of your Synology NAS. Connect one end of the AC
power cord to the AC power adapter, and the other to the power outlet.
3
Press the power button to turn on the DS1522+.
Congratulations! Your Synology NAS is now online and detectable from a network computer.