Synopsys DesignWare 826-0 - Page 15

Synopsys, Inc. 15
SolvNetPlus
DesignWare
5.60a
March 2020
PCIe IP Prototyping Kit Installation Guide Setting Up Hardware Components
a. 3M
TM
Part Number
b. To perform Precision Time Measurement (PTM) tests, use the PCIE-8_PDL_MGB card to connect the HAPS board to the
Motherboard or PTC card. The PCIE-4 MGB Kit has an embedded PCIe bridge chip, that influences test results.
Note
NoteNoteNote
To power the PCIe Backplane you need an ATX power supply.