SystemAir changeair Freshman Series User Manual

5
Freshman Series - Owner's Manual - Installation, Operation, and Service Instruction - Version 1.1 EN
Identication
2.0 Identication
2.1 General Information
Please keep this page for future reference
You have just purchased a Freshman Series Air Handling Unit.
This design is certied by the Canadian Standards Association
(CSA) and bears the label indicating it has been tested to the
current safety standards UL 1995 and CAN/ CSA 22.2 No. 236
for both the United States and Canada.
To simplify the proper installation and to assure that the unit
will operate in conformity with generally accepted safety
regulations, the manufacturer and testing agency require that
Installation should be carried out by a qualied HVAC techni-
cian using industry accepted standard practices. If questions
arise during installation contact Changeair Technical Services
for assistance before proceeding.
2.3 Reference Information
REFERENCE INFORMATION
For future reference, you should record the following information from the units
Dealer Name: ______________________________________
Address: __________________________________________
City: ______________________________________________
State (Province): ____________________________________
Zip or Postal Code:___________________________________
Country: ___________________________________________
Model Number(s)____________________________________
__________________________________________________
Serial Number(s) ____________________________________
__________________________________________________
Date of Purchase____________________________________
Date of Installation___________________________________
2.2 Unit Inspection
Inspected For Freight Damages
Your air handling unit was carefully packed for shipping. This
means that the packaged product, with normal handling, will
withstand the load conditions encountered in normal transit
and in handling.
Your air handling unit should be inspected at the time of deliv-
ery to determine if any damage is present due to shipping or
handling. If any damage is discovered, do not install the unit.
Notify the freight company immediately and le a damage
claim. The receiver is responsible for identifying damage and
making a claim. If a partial claim is made Changeair will assist
you in determining replacement cost for any damaged parts.
The manufacturer can bear no responsibility for damages that
occur in transit, or for improper operation of the unit as a result
of shipping damages.
NOTE:
Do not deviate from the instructions as
outlined in this manual. Failure to follow
the installation, operation and maintenance
instructions will void the responsibility of
Changeair.

SystemAir changeair Freshman Series Specifications

General

Brand	SystemAir
Model	changeair Freshman Series
Category	Air Handlers
Language	English