SystemAir SAVE–P VTR 150/B User Manual

8
| Installation
Fig. 5 Sticker dimensions
6.1 Wall preparation for mounting bracket
1. Prepare the surface where the unit is to be mounted. Make sure that the surface is flat, vertical and that it supports
the weight of the unit. Perform the installation in accordance with local rules and regulations.
Fig. 6 Surface preparation.
C — concrete/bricks, W — wood block, G — gypsum, M — mineral wool
If the wall is from a thick concrete or bricks, no special preparation is needed (figure 6, pos. A), otherwise make nec-
essary adjustments (figure 6, pos. B). The unit weights 46 kg.
271401 | v1

SystemAir SAVE–P VTR 150/B Specifications

General

Brand	SystemAir
Model	SAVE–P VTR 150/B
Category	Industrial Equipment
Language	English