SystemAir SAVE–P VTR 150/B User Manual

14
| Installation
6.5.1 Mounting the kitchen furniture panel directly on the unit
Fig. 16 Top view
Depending on the kitchen cupboard depth, the unit might
have to be shifted forward for the panel to be aligned
with the cupboards.
Number Explanation
1
Wall or any other mounting surface
2
Wood block (if needed, 25–100 mm)
3
SAVE–P VTR 150/B
4
Adjustable bolts (15–25 mm)
5
Kitchen furniture panel (P)
Adjust bolts if shifting distance is less than 25 mm or use wood blocks in case the required distance is greater.
Fig. 17 Installation of bolts
1. Install four M6 bolts into threaded inserts on the unit and lock bolts with hex nuts (figure 17). Bolts protrusion can be
adjusted later.
A cross screwdriver and a 10 mm spanner are needed. They are not included in the package.
271401 | v1

SystemAir SAVE–P VTR 150/B Specifications

General

Brand	SystemAir
Model	SAVE–P VTR 150/B
Category	Industrial Equipment
Language	English