30
8 - Product Description
Water Filter
It is assembled on the unit as a standard.
Anti-Vibration Kit
See figure below.
Flow switch kit
It is assembled on the unit as a standard
Corrosion proofing protection for condensing
Two-level optional coil finishing
1) Fin guard Silver.
2) Blue fins.
Pump
The unit is available:
- without pump
8.2 Accessories
- with 1 pump that guarantee 150 kPa of available static pressure;
- with 2 pumps that guarantee 150 kPa of available static pressure
Water buffer tank
The hydro module is available for the units with a pump; it is fitted
inside and integrated in the circuit.
The module is entirely enclosed in a RAL 9001 galvanised and
painted steel body.
The tank is covered with 10mm polyethylene insulation and it is
provided with a 200W anti-freezing heater.
On/Off Remote kit
It enables the operator to power on the unit when it is in stand by
mode, to display alarm and to switch over cooling – heat pump.
The kit will include a 3 metre long cable for installation on the wall.
To Next Page
Loading...
