To Next PageTo Next Page
Need help?Do you have a question about the T.I.P. LTP 40/10 and is the answer not in the manual?
General| Max. Suction Height | 8 m |
|---|---|
| Pump Housing Material | Plastic |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Plastic |
| Flow Rate | 40 m³/h |
| Head | 9 m |
Essential precautions for a safe working environment.
Guidelines to prevent personal injury during operation.
Critical safety rules for engine operation and fuel handling.
Procedures to ensure safety during maintenance tasks.
Basic guidelines for pump setup and connection.
Proper setup of the suction side, including filters and check valves.
Guidelines for connecting the discharge side of the pump.
Recommendations for securing the pump in a fixed location.
Initial checks and preparation before starting the pump.
Procedures for adding fuel, safety during refueling.
Checking and topping up motor oil, including low-oil safety features.
Steps for priming the pump and filling the housing with water.
Step-by-step guide to starting the petrol engine.
Important rules and precautions during normal pump operation.
Correct procedure for shutting down the engine.
Final steps after use, including draining and transport prep.
How to perform oil changes and check oil levels.
Explanation of the engine protection system.
Instructions for cleaning, checking, and replacing the spark plug.
How to clean or replace the air filter for optimal performance.
Procedure for replacing the seal to prevent leaks.
Steps to clear blockages from the pump body and impeller.
Guidelines for safely transporting and storing the pump.
Common issues, causes, and solutions for pump malfunctions.
