T Scale IHB++ -300 User Manual

IHB++ Series Technical Manual
- 12 -
 Press key to confirm, display will be shown ---- then will show the
quantity
 Then can add goods on the platform, display will update the parts quantity
automatically
Press key to change normal mode, when in counting mode.
6.7 Accumulation
The scale can be set to accumulate manually by pressing key.
Before operation scale should be stable and return to zero, accumulation available
only when weight more than 20d
To enable accumulation function, select parameter F4 ACC > ACC on
Accumulation Operation
 Place the load on the platform.
 Press key, when displayed STABLE indication.
 Display will be show
then will be show the total saved value. These displays will be shown only
three seconds. If the optional RS-232 interface is installed the weight data will
be send to printer.
 Remove the weight from the pan.
 When display get zero and stable then place the second weight.
 It can continue until the memory gets fully.
6.7.1 Memory Recall
To recall the memory press key.
Display will be show
(X: Total number of accumulation) then will be show the total saved value. These
displays will be shown only three seconds.
6.7.2. Memory Clear
To clear the memory, press key to view and press key during the
accumulation displayed. Display will be show normal display , all accumulation
memory cleared from the memory
Acc 1
Acc X

T Scale IHB++ -300 Specifications

General

Brand	T Scale
Model	IHB++ -300
Category	Scales
Language	English