T Scale IHB++ -300 - 7. PARAMETERS; Entering the Parameter Menu; Navigating Menu Options; Selecting Menu Items

IHB++ Series Technical Manual
- 13 -
7. PARAMETERS
Enter the Menu
 Turn on the scale. Press during that start up until display will be shown
Choose the Menu
 Press , it can choose menu block or options one by one.
Enter the Selected Menu
 Press , it can confirm which will be shown displayed.
Enter in to TECH
 When display showed Pi n , press and keys to enter the
function
Escape from the Menu
 Press key, it can escape from the menu to weighing mode.
Menu
Sub Menu
Description
F1 unt
ct / lb / oz / d
/gn/ ozt / dwt /
mom / tl.T / tlj
/tlh/ t / bt / n
To select weighing unit on / off
F 2 bl
El au
To set back light automatic on
El on
To set back light always on
El off
To set back light always off
F3 com
S 23 2
S usb
Select first RS 232 or USB
P prt
By pressing Print key , weighing
value will be added to the
memory and print the print out
P cont
Send data continuous
P auto
Automatic accumulation.
Individual weighing values are
automatically added
P ask
ASK mode
Command R: read data
Command T: Tare
Command Z: Zero
F1 unt