(844) 482-2822
VIEWING EDITING & SHARING
4. Open the Tactacam App and connect to your Tactacam.
Android users: You will need to download a video player for your device.
We recommend MX Media player you can nd it in the Android app store.
5. Turn Wi-Fi Off - Press and hold the Wi-Fi/Mode button for 4 seconds.
This will turn off your Wi-Fi and disconnect you from your mobile device.
For complete pairing instructions, visit tactacam.com/support
Date Time - Automatic (excludes Solo)
1. Your camera’s date and time are automatically set when you
connect your camera to the Tactacam App. Your Tactacam will also
install a Text le on your SD Card that will allow you to manually set
the date and time, if needed.
Date Time - Manual
Your Tactacam will install a Text le on your SD Card. This Text le will
allow you to set the date and time.
1. Simply connect your Tactacam to your computer with the
supplied USB cord and open up the text le located on the SD Card.
2. Adjust the time and date on the text le. Save and close the le.
3. Eject your camera from the computer.
4. Remove your camera from the USB cord to apply the time and
date settings.
See video tutorials at tactacam.com/support
TACTACAM APP - DATE/TIME
To Next Page
Loading...
Need help?
General
