370 Spare Parts TB7100 Service Manual
© Tait Electronics Limited October 2005
L-shaped gap pad 1 369-01048-xx Figure 7.5
Rectangular gap pad (50W/40W version only) 1 369-01049-xx Figure 7.5
Insulating rubber (under regulator on SI board) 1 362-00010-21 Figure 7.7
Insulating washer M3 (for screw through regulator on SI board) 1 353-00010-18 Figure 7.7
Screw M3x10 (through regulator on SI board) 1 345-00040-xx Figure 7.7
Fan 2 219-02993-xx Figure 7.8
Fan duct 1 319-01269-xx Figure 7.8
Screw M3x25 (fans) 4 345-00040-xx Figure 7.8
Cable tie 5 369-00010-xx –
The characters xx in an IPN stand for the issue number. Items will always be the latest issue at the time the
radio is manufactured.
The characters yy in an IPN or spares kit number stand for the abbreviated frequency band.
For more information, refer to “Frequency Bands” on page 11.
Table 16.1 Spare parts
Description Qty. IPN Figure
To Next Page
Loading...
Need help?
General
