Tait TB7100 Service Manual

TB7100 Service Manual Transmitter Fault Finding (50W/40W) 285
© Tait Electronics Limited October 2005
14.2 Transmitter RF Power
Introduction If there is no fault with the power supplies, check the transmitter RF power
and correct any fault. The procedure is covered in the following eight tasks:
■ Task 4: check forward and reverse powers
■ Task 5: check RF output power
■ Task 6: power unchanged regardless of setting
■ Task 7: check for inhibiting of transmitter
■ Task 8: check temperature sensor
■ Task 9: power and current are skewed
■ Task 10: repair output matching circuitry
■ Task 11: power and current are low
The measurement points for diagnosing faults concerning the transmitter
RF power are summarized in Figure 14.7. Data required for the first task
(checking the forward and reverse powers) are supplied in Table 14.3.
Table 14.3 Voltages in millivolts corresponding to nominal forward and reverse powers
Frequency band Forward power (318 command) Reverse power (319 command)
B1 2600 to 3400 < 500
H5 3200 to 3900 < 700
H7 3300 to 4000 < 900

Tait TB7100 Specifications

General

Brand	Tait
Model	TB7100
Category	Accessories
Language	English