30 General Safety and Regulatory Information TB7300 Installation and Operation Manual
© Tait International Limited December 2022
Tait recommends that all network and audio connectors should be sealed
with a stick-on type of seal. The seal should reveal if any of the connectors
have been unplugged, or if any unauthorized equipment has been plugged
in.
The seals should be difficult to remove without breaking, and should bridge
between the cable and equipment side (plug and socket) of the connection.
Seals should cover any unused network or audio sockets. This includes the
Ethernet connector on any adaptor front panels, any spare switch ports, and
the console port on the router and switch.
The seals should be difficult to reproduce. A sticker initialed or signed by
the technician should satisfy this.
Seals must be replaced if they need to be disturbed during maintenance.
To Next Page
Loading...
Need help?
General
