TB7300 Installation and Operation Manual Connecting to the Base Station 33
© Tait International Limited December 2022
4 Connecting to the Base Station
The web browser on your PC provides a window into the TB7300 base
station. Use it to connect to the base station so that you can monitor,
configure, diagnose, and calibrate it (if required).
This section describes the following:
■ Connecting to the base station, including initially setting things up
■ Working with base station web pages
■ Carrying out basic tasks
This section provides an overview of some aspects of the web interface.
Refer to the Help for detailed instructions.
4.1 PC Recommendations
We recommend the following PC hardware and software for connecting to
a TB7300 base station:
■ SVGA Monitor (1024 x 768 minimum)
■ Network connection
■ The base station works with recent versions of most modern browsers
Notice Refer to the Release Notes for more information on currently
supported browsers.
To Next Page
Loading...
Need help?
General
