40 Connecting to the Base Station TB7300 Installation and Operation Manual
© Tait International Limited December 2022
4.3.2 Viewing Configuration Settings
The base station has many configuration settings that personalize it for its
particular role in the network. Some settings, such as those for alarm
thresholds (Configure > Alarms > Thresholds), always apply.
Others are channel-based so that they can be dynamically changed. To view
these, you first need to know the channel that the base station is operating
on.
To see the channel number and profiles the base station is using, go to:
■ P25/AS-IP: Monitor > Interfaces > Conventional RF
■ DMR/MPT: Monitor > Interfaces > Analog RF or DMR RF
To Next Page
Loading...
Need help?
General
