10 Base Station Specifications TB9400 Specifications Manual
© Tait Limited July 2017
1.1 Regulatory Information
Test Methods Where applicable, the test methods used to obtain these specifications are
those described in the following standards:
■ TIA-102.CAAA-D
■ TIA-102.CCAA-A
■ EN 300 086
■ EN 300 113
■ EN 300 219
■ EN 301 489
■ CFR Title 47 Part 15
■ TIA/EIA-603/603-D
■ AS/NZS 4295
Emission
Designators
This equipment is compatible with the emissions listed in the following
table.
You can obtain further details of test methods and the conditions which
apply for compliance testing in all countries from Tait.
Emission
Designator Common Name
Modulation
Scheme Operating Modes
11K0F3E FM analog FM analog voice
8K10F1E P25 Phase 1 C4FM digital voice
8K10F1D P25 Phase 1 C4FM data/control channel
8K10F7W P25 Phase 1 C4FM digital voice/data/
control channel
8K70D1W P25 Phase 1
linear simulcast
modulation
CQPSK digital voice
8K70D7W P25 Phase 1
linear simulcast
modulation
CQPSK digital voice/data/
control channel
9K80D7W P25 Phase 2
linear simulcast and
non-simulcast
modulation
H-DQPSK digital voice/data
6K80D7W test mode only H-D8PSK digital voice/data
To Next Page
Loading...
Need help?
General
