40 Module Specifications TB9400 Specifications Manual
© Tait Limited July 2017
2.2 PA
2.2.1 Identifying the PA
You can identify the model and hardware configuration of a PA by referring
to the product code printed on labels on the front and rear panels. The
meaning of each character in the product code is explained in the table
below.
Notice This explanation of PA product codes is not intended to sug-
gest that any combination of features is necessarily available in any one
PA. Consult your regional Tait office for more information regarding
the availability of specific models and options.
Product Code Description
T01-01121-XXXX Frequency Band and Sub-band
D = 148MHz to 174MHz (B3 band)
K = 400MHz to 440MHz (H1 band)
L = 440MHz to 480MHz (H2 band)
M = 470MHz to 520MHz (H3 band)
N = 762MHz to 870MHz (K4 band)
a
a. The actual frequency coverage in this band when used with a K4-band TB9400 re-
citer is 762MHz to 776MHz and 850MHZ to 870MHz.
T01-01121-XXXX A = 50W
B = 100W
T01-01121-XXXX A = default
T01-01121-XXXX A = default
To Next Page
Loading...
