EasyManuals Logo

Tait TB9400 Specification Manual

Tait TB9400
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
TB9400 Specifications Manual Base Station Specifications 11
© Tait Limited July 2017
1.2 Frequency Bands and Sub-bands
Many of the performance figures in this manual are applicable to all
frequency bands. In some cases the figures refer to specific bands or sub-
bands, and these are identified with the letters listed in the following table.
The table also indicates which base station configurations are currently
available in each frequency band.
Refer to “Compliance Standards” on page 44 for details about which bands
or sub-bands have been tested and approved to appropriate national and
international compliance standards.
In Brazil, for K band, the TB9400 is considered to be configured as a base
station with retransmission of receive frequencies.
Frequency
Identification Frequency Band and Sub-band 50W 100W Receive-only
B band B3 = 148MHz to 174MHz
✓✓
H band H1 = 400MHz to 440MHz
H2 = 440MHz to 480MHz
H3 = 470MHz to 520MHz
✓✓
K band K4 = 762MHz to 870MHz
a
✓✓
a. The actual frequency coverage in this band is:
Transmit: 762MHz to 776MHz, and 850MHz to 870MHz
Receive: 792MHz to 824MHz

Other manuals for Tait TB9400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tait TB9400 and is the answer not in the manual?

Tait TB9400 Specifications

General IconGeneral
BrandTait
ModelTB9400
CategoryAccessories
LanguageEnglish

Related product manuals